1.6Y-200 small hydraulic oil press is a new type oil press which is widely used for family daily use,especially for pressing olive,sesame, walnut, pine nuts.
2.Our press is not only electric, automatic CNC small oil press, please be sure to distinguish, electric is not fully automatic.
3. The temperature of the press is controlled by the temperature controller. If the temperature is lower than the set temperature, the machine will automatically heat and the temperaturer reach set the temperature,he machine will stop heating automatically.
4.Machine pressure are hydraulic control, the pressure reaches the set pressure, the motor will automatically stop, low pressure set the pressure motor will start work.
Model: 6Y-200 hydraulic oil press
Capacity: 40kg/h for oil seeds
Power: 1.5kw (220v/50hz)
Heating part: 700w (220v/50hz)
Pressing chamber dia: inner( 125mm), outer( 145mm), height: 250mm
Hydro-cyclinder: inner( 160mm), outer(196mm), stroke: 250mm
Fix pressure: low 10MPA, high 40MPA
Total pressure: 70-80t
Size: 530x 530x1030mm
Hydraulic press must pay attention to the problem:
1.Can not arbitrarily adjust the high pressure and high temperature
2.Hydraulic oil must be clean
3.Oil squeeze process in the process of slag, is the pressure or the fuel temperature is too low to cause
4.After the oil is finished, the machine must be in the air pressure state
5.queeze the press of the second part of the raw material can only be pressed to maintain the capacity of the previous press, or easy to open the top of the empty chamber
6.Cover and the screw gap must be balanced, so as not to damage the press chamber
If you're looking for the hydraulic oil press machine with ce 6y-200, welcome to buy the quality and cheap hydraulic oil press machine with ce 6y-200 with us. We are one of the professional press machine manufacturers and suppliers in China. We will also offer you the wholesale service at big discount.